MIL-PRF-28750 Relays, Solid State, General Specification ForThis specification covers the general requirements for hermetically sealed or encapsulated solid-state relays \(SSR\'s\) \(see 6.1\), incorporating semiconductor, microelectronic, and passive circuit devices.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13

MIL-PRF-28750F

3.13.9 Overload: Will not trip current (short circuit protected SSR's) (when specified, see 3.1). When SSR's are

tested as specified in 4.7.7.3, the SSR shall remain ON for the specified time (see 3.1).

3.13.10 Overload: Must trip current (short circuit protected SSR's) (when specified, see 3.1). When SSR's are

tested as specified in 4.7.7.4, the SSR shall shut OFF within the specified time (see 3.1).

3.13.11 Turn-on into a shorted load (when specified, see 3.1). When SSR's are tested as specified in 4.7.7.5, the

SSR shall shut OFF.

3.13.12 Shorted load with SSR ON (when specified, see 3.1). When SSR's are tested as specified in 4.7.7.6, the

SSR shall shut OFF.

3.13.13 Status turn-on time (when specified, see 3.1). When SSR's are tested as specified in 4.7.7.7, the status

turn-on time shall not exceed the specified value (see 3.1).

3.13.14 Status "ON" voltage (when specified, see 3.1). When SSR's are tested as specified in 4.7.7.8, the status

"ON" voltage shall be as specified (see 3.1).

3.13.15 Status turn-off time (when specified, see 3.1). When SSR's are tested as specified in 4.7.7.9, the status

turn-off time shall not exceed the specified value.

3.13.16 Status "OFF" voltage (when specified, see 3.1). When SSR's are tested as specified in 4.7.7.10, the

status "OFF" voltage shall be as specified (see 3.1).

3.13.17 Status blocking voltage (when specified, see 3.1). When SSR's are tested as specified in 4.7.7.11, the

status (off) current shall not exceed the specified value.

3.13.18 Status leakage current (when specified, see 3.1). When SSR's are tested as specified in 4.7.7.12, the

status leakage current shall not exceed the specified value.

3.13.19 Turn-on time. When SSR's are tested as specified in 4.7.7.13, the turn-on time shall not exceed the

specified value (see 3.1).

3.13.20 Turn-off time. When SSR's are tested as specified in 4.7.7.14, the turn-off time shall not exceed the

specified value (see 3.1).

3.13.21 Output voltage drop. When SSR's are tested as specified in 4.7.7.15, the output voltage drop shall not

exceed the value specified (see 3.1).

3.13.22 Output leakage current. When SSR's are tested as specified in 4.7.7.16, the leakage current in the output

circuit shall not exceed the specified value (see 3.1).

3.13.23 Transient voltage (when specified, see 3.1). When SSR's are tested as specified in 4.7.7.17, the output

shall not turn on (see 3.1).

3.13.24 DC offset voltage (ac SSR's only) (when specified, see 3.1). When SSR's are tested as specified in

4.7.7.18, the dc offset voltage shall not exceed the specified value (see 3.1).

3.13.25 Waveform distortion (ac SSR's only) (when specified, see 3.1). When SSR's are tested as specified in

4.7.7.19, the waveform distortion (commutation spikes) shall not exceed the specified value (see 3.1).