MIL-PRF-28750F
c.
Apply the necessary input conditions to turn the output off.
Verify leakage current is as specified (see 3.1) by measuring I(output).
d.
4.7.7.17 Transient voltage (see 3.13.23).
a.
Test setup in accordance with figure 1.
b.
Apply the necessary input conditions to turn the output off.
Apply the specified (see 3.1) voltage, and frequency (if applicable), and test load.
c.
For the specified (see 3.1) time apply the specified (see 3.1) transient voltage to the output of the SSR. For
d.
the purpose of test, a low current supply may be used.
e.
Monitor the output to verify that the SSR does not turn on.
4.7.7.18 DC offset voltage (ac SSR's only) (see 3.13.24).
a.
Test setup in accordance with figure 2.
Apply the specified (see 3.1) load, voltage, and frequency.
b.
c.
Apply specified (see 3.1) input turn-on conditions.
Verify the offset voltage is as specified (see 3.1) by measuring V(offset).
d.
4.7.7.19 Waveform distortion (ac SSR's only) (see 3.13.25).
a.
Test setup in accordance with figure 1.
Apply specified (see 3.1) load, voltage and frequency.
b.
c.
Apply specified (see 3.1) input turn-on conditions.
With SSR turned ON, verify that output voltage, V(output), is as specified (see 3.1) (see figure 3).
d.
4.7.7.20 Minimum load current rating (ac SSR's only) (see 3.13.26).
a.
Test setup in accordance with figure 1.
b.
c.
Apply specified (see 3.1) input turn-on conditions.
d.
Verify that the SSR turns ON and remains ON by measuring the output voltage, V(output).
a.
Test setup in accordance with figure 4, or equivalent as approved by the qualifying activity.
28
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business