MIL-R-83726/7E
PHYSICAL DATA:
Dimensions and configuration: See figure 1. Weight: 0.25 pound maximum.
Terminal strength: 3 ±0.5 pounds pull maximum.
Finish: Bright nickel in accordance with SAE-AMS-QQ-N-290, class 1, type IV.
Marking: See MIL-PRF-83726. In addition, relays shall be marked with the ESDS identifier as specified in MIL-STD-1285.
ESDS protection program: The manufacturer shall establish and maintain an ESD control program. Relays shall be handled, preserved, and packaged in such a manner as to ensure that the integrity of ESD sensitive relays is not diminished. ESD sensitive relays shall be handled, preserved, and packaged in accordance with the requirements of MIL-STD-1686.
Part or Identifying Number (PIN): Consists of the prefix M83726/7-, a four-digit dash number expressed in milliseconds as follows:
M |
83726/7- |
1001 |
| |
| |
| |
Military designation | |
| |
| |
| |
| |
Specification sheet number | |
| The first three digits are | significant; the fourth digit is
the number of zeros to follow the first three digits. (The time delay is expressed in milliseconds and
converted to seconds.) See examples.
Example: M83726/7 - 0600 - 60 millisecond time delay. CONFORMANCE INSPECTION:
Performance of groups B and C tests are not applicable.
Referenced documents. In addition to MIL-PRF-83726, this document references the following:
The margins of this specification are marked with vertical lines to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business