MILITARY SPECIFICATION RELAYS, REED, DRY,
GENERAL SPECIFICATION FOR
INCH-POUND MIL-R-83516B
15 August 2011 SUPERSEDING
MIL-R-83516A(USAF)
3 March 1983
INACTIVE FOR NEW DESIGN AFTER 3 MARCH
1983 AND IS NO LONGER USED, EXCEPT FOR REPLACEMENT PURPOSES.
This specification is approved for use by the Department of the Air Force, and is available for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification establishes the general requirements for dry reed relays. (See 6.1.)
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This section does not include documents cited in other sections of this specification or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents cited in sections 3 and 4 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
COMMERCIAL ITEM DESCRIPTION
A-A-59588 - Rubber, Silicone. DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-DTL-17 - Cables, Radio Frequency, Flexible and Semirigid, General Specification for. MIL-I-24768/1 - Plastic Sheet, Laminated, Thermosetting, Glass-Cloth, Melamine-Resin
(GME).
MIL-I-24768/9 - Insulation, Plastic, Laminated, Thermosetting, Nylon-Fabric Base, Phenolic- Resin (NPG).
MIL-I-24768/17 - Insulation, Plastic, Laminated, Thermosetting, Glass-Cloth, Silicone-Resin
(GSG).
Comments, suggestions or questions on this document should be addressed to DLA Land and Maritime, ATTN: VAT, Post Office Box 3990, Columbus, OH 43218-3990, or emailed to relay@dla.mil. Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A FSC 5945
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business