MIL-R-39016/40G
TABLE II. Qualification inspection and sample size. 1/
Single submission |
Group submission |
|
50 units plus 1 open unit. One failure allowed. Qualification inspection as applicable |
M39016/40-001 M39016/40-009 M39016/40-024 M39016/40-014 |
50 units plus 1 open unit. One failure allowed. Qualification inspection as applicable 2 units each PIN, qualification inspection table, Q2. No failures allowed 2 units, qualification inspection table, Q2, and shock, vibration, acceleration, terminal strength, and seal. |
SUPERSESSION DATA: See table III.
TABLE III. Supersession data.
Superseded PIN M5757/90- |
New PIN M39016/40- |
Superseded PIN M5757/90- |
New PIN M39016/40- |
|
001 and 002 |
001 |
025 and 026 |
013 |
|
003 and 004 |
002 |
027 and 028 |
014 |
|
005 and 006 |
003 |
029 and 030 |
015 |
|
007 and 008 |
004 |
031 and 032 |
016 |
|
009 and 010 |
005 |
033 and 034 |
017 |
|
011 and 012 |
006 |
035 and 036 |
018 |
|
013 and 014 |
025 |
037 and 038 |
007 |
|
015 and 016 |
008 |
039 and 040 |
009 |
|
017 and 018 |
026 |
041 and 042 |
011 |
|
019 and 020 |
010 |
043 and 044 |
028 |
|
021 and 022 |
027 |
045 and 046 |
029 |
|
023 and 024 |
012 |
047 and 048 |
030 |
VERFICATION REQUIREMENTS:
Groups B and C not required. Group A required. The qualifying activity shall be notified of any design and/or construction changes and shall impose additional testing requirements as necessary.
Referenced documents. In addition to MIL-PRF-39016, this document references the following: ASTM B488
MIL-PRF-39016/14
MIL-STD-202
Changes from previous issue: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business