MIL-PRF-39016/53C
Qualification inspection (reduced testing) and sample size: See table III. If the relays produced for MIL-PRF-
39016/53 are similar in construction and design except for the diodes and coils to the relays produced for MIL-
PRF-39016/54 then reduced testing for qualification of MIL-PRF-39016/53 relays may be performed concurrent
with or subsequent to successful qualification of MIL-PRF-39016/54.
TABLE III. Qualification inspection (reduced testing) and sample size.
Examination or test
2 units each coil voltage
Group II of qualification inspection table.
(Plus shock and vibration testing shall be performed on -013).
1 unsealed sample unit for internal inspection
Referenced documents: In addition to MIL-PRF-39016, this document references the following:
MIL-PRF-39016/54
MIL-STD-202
MIL-STD-750
MIL-STD-1285
ASTM-B488
Changes from previous issue. The margins of this specification are marked with vertical lines to indicate where
changes from the previous issue were made. This was done as a convenience only and the Government assumes no
liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the
requirements of this document based on the entire content irrespective of the marginal notations and relationship to
the last previous issue.
Custodians:
Preparing activity:
Army - CR
DLA - CC
Navy - EC
Air Force - 11
(Project 5945-2006-021)
DLA - CC
Review activities:
Army - AR
Navy - AS, MC, OS, SH
Air Force - 19
NOTE: The activities listed above were interested in this document as of the date of this document. Since
organizations and responsibilities can change, you should verify the currency of the information above using the
7