MIL-PRF-39016/45E
Inches
mm
Inches
mm
.002
0.05
.250
6.35
.003
0.08
.400
10.16
.015
0.38
.410
10.41
.020
0.51
.412
10.46
.030
0.76
.455
11.45
.100
2.54
.600
15.24
.120
3.05
8.10
20.57
.125
3.18
1.062
26.97
.187
4.75
1.078
27.38
.190
4.83
1.320
33.53
.200
5.08
2.950
74.93
NOTES:
1. Dimensions are in inches.
2 Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerance is ±.010 (0.25 mm).
4. Terminal indicated shall be identified by a contrasting bead. Relays shall have (+) and (-) signs placed on the
circuit diagram as shown.
5. Coil symbol is optional in accordance with MIL-STD-1285.
6. Mounting screw head clearances based on use of No. 4 fillister head screws.
7. When relay enclosure has side mounting hardware, the contrasting header bead shall be located on the
opposite side from the mounting hardware.
8. Mounting surface finish shall be compatible with aluminum (duralumin type) as defined by MIL-STD-889.
9. Energizing the indicated coil with proper polarity and voltage shall cause the relay contacts to assume the
position shown.
10. Terminal numbers in circuit diagram are for reference only. Numbers do not appear on relay.
FIGURE 1. Dimensions and configuration - Continued.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business