MS25468L
TABLE III. Operating characteristics.
PIN MS25468- |
Coil data |
Time - milliseconds max |
|||||||||||
Coil |
Volts 1/ |
Freq Hz |
Max |
Max pick-up voltage |
Drop out vol- tage |
Op- erate 3/ |
Rel- ease 4 |
Contact bounce |
|||||
|
Volts |
Amp |
Nor- mal 2/ |
High temp test |
Cont cur- rent test |
Main |
||||||||
|
NO |
NC |
||||||||||||
|
D1 |
X1, X2 Y1, Y2 |
28 |
dc |
29 |
0.17 |
18 |
18 |
19.8 |
N/A |
25 |
N/A |
2 |
2 |
|
A1 |
X1, X2 Y1, Y2 |
115 |
400 5/ |
122 |
0.07 |
90 |
90 |
95 |
N/A |
25 |
N/A |
2 |
2 |
AD1 6/ |
X1, X2 |
115 |
400 5/ |
122 |
0.07 |
90 |
90 |
95 |
N/A |
25 |
N/A |
2 |
2 |
Y1, Y2 |
28 |
dc |
29 |
0.17 |
18 |
18 |
19.8 |
N/A |
25 |
N/A |
2 |
2 |
|
1/ CAUTION: Use of any coil voltage less than rated coil voltage will compromise the operation of the relay.
2/ Over the temperature range.
3/ With rated coil voltage.
4/ From rated coil voltage.
5/ MS25468-A1 and AD1, ac coils may be used on 60 Hz if maximum ambient temperature is limited to +85°C (maximum coil current shall be 0.077 ampere).
6/ MS25468-AD1 is inactive for new design after 29 September 1987.
CONFORMANCE INSPECTION:
Performance of groups B and C tests is not applicable to MS25468-AD1.
Part or Identifying Number (PIN): MS25468- (plus applicable dash number from table I. Example: MS25468-D1.)
Group B and C inspections may be suspended at the discretion of the qualifying activity. Qualification by similarity: See MIL-PRF-6106.
Custodians: Preparing activity: Navy - AS DLA - CC
Air Force - 11
DLA - CC (Project 5945-1214-15)
Review activities: Navy - EC
NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using ASSIST Online database at www.dodssp.daps.mil.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business