MS25468L
Inches .001 |
mm 0.03 |
.002 |
0.05 |
.005 |
0.13 |
.010 |
0.25 |
.040 |
1.02 |
.062 |
1.57 |
.125 |
3.18 |
.152 |
3.86 |
.235 |
9.53 |
.500 |
12.70 |
.594 |
15.09 |
1.000 |
25.40 |
1.187 |
30.15 |
1.531 |
38.89 |
1.812 |
46.02 |
NOTES:
11 Dimensions are in inches.
21 Metric equivalents are given for general information only.
31 Unless otherwise specified, tolerance is ±.010 (0.25 mm).
41 Terminal numbers need not appear on relay headers provided there is affixed to the relay a suitable legible circuit diagram that permanently and positively identifies each terminal location specified hereon.
51 Relay is magnetically latched in both positions. Caution note to observe polarity must appear on relays with dc coils.
61 Shock, vibration, and acceleration requirements application with coils de-energized
71 The use of diodes on ac relays is optional. The actual application must be shown on the label.
81 In the event of conflict between the text of this specification and the references cited herein, the text of this standard shall take precedence.
91 Referenced Government documents of the issue listed in that issue of the Department of Defense Index of Specifications and Standards (DoDISS) specified in the solicitation form a part of this standard to the extent specified herein.
FIGURE 1.Dimensions, configurations, and circuit diagrams - Continued.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business