MIL-PRF-39016/6L
QUALIFICATION INSPECTION AND SAMPLE SIZE: See table II.
TABLE II. Qualification inspection and sample size.
Group submission
Single submission
Type 1
Type 2
M39016/6-104
M39016/6-204
33 units plus 1 open unit for
33 units plus 1 open unit
level M at C = 0 1/
for level M at C = 0 1/
Qualification inspection
Qualification inspection
as applicable.
as applicable.
M39016/6-115
M39016/6-215
2 units, qualification
M39016/6-149
M39016/6-249
inspection table, group II,
and shock, vibration,
acceleration, terminal
strength, and seal.
M39016/6-141
M39016/6-241
2 units, qualification
M39016/6-142
M39016/6-242
inspection table, group II,
shock, and vibration.
M39016/6-123
M39016/6-223
2 units, qualification inspection
M39016/6-132
M39016/6-236
Q2.
For extension of
For extension of
qualification to
qualification to
type 2
type 1
M39016/6-204
Not applicable
1 unsealed sample unit.
1/ The number of units required for qualification testing shall be increased as required in Q5, MIL-
PRF-39016, if the relay manufacturer elects to test the number of units permitting one or more
failures. Prior to performance of qualification inspection testing the relay manufacturer shall
preselect the sample size.
QUALIFICATION INSPECTION (REDUCED TESTING) AND SAMPLE SIZE: See table III. If the relays
produced for MIL-PRF-39016/6 are similar in construction and design to the relays produced for MIL-PRF-
39016/55 (except for the diodes and coils, as applicable), then reduced testing for qualification of MIL-PRF-
39016/6 relays may be performed concurrent with or subsequent to successful qualification of MIL-PRF-
39016/55.
TABLE III. Qualification inspection (reduced testing) and sample size.
Examination or test
Q2 of qualification inspection table
(2 units each coil voltage)
1 unsealed sample unit for internal examination
(submitted with test report)
8
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business