MIL-PRF-39016/22E
REQUIREMENTS:
Contact data:
Load ratings:
High level (relay case grounded).
Resistive: 2 amperes at 28 V dc; .100 ampere maximum at 115 V ac, (60 and 400 Hz).
Inductive: .50 ampere maximum at 28 V dc maximum with 200 millihenries minimum.
Lamp: 0.160 ampere maximum at 28 V dc maximum.
Low level: 10 µA to 50 µA at 10 mV to 50 mV dc or peak ac.
Intermediate current: Applicable.
Contact resistance or voltage drop:
Initial: 0.050 ohm maximum.
High level:
During life: Not more than 5 percent of open circuit voltage.
After life: .100 ohm maximum.
Low level:
During life: 33 ohms maximum.
After life: 0.150 ohm maximum.
Intermediate current:
During intermediate current: 1 ohm maximum.
After intermediate current: .300 ohm maximum.
Contact bounce: 2.0 milliseconds (ms) maximum. (Applicable to failure rate level "L").
Contact stabilization time: 2.5 ms maximum. (Applicable to failure rate level "M", "P", and "R").
Overload (high level only): Two times rated current.
Coil data: See table I.
Operate time: 5 ms maximum over temperature range with rated coil voltage.
Release time: 5 ms maximum over temperature range from rated coil voltage.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business