MIL-PRF-39016/15L
TABLE I. Dash numbers and characteristics 1/ - Continued.
1/ Each relay possesses high level and low level capabilities. However, relays previously tested or used above 10
mA resistive at 6 V dc maximum or peak ac open circuits not recommended for subsequent use in low level
application.
2/ The suffix letter L, M, P, or R, to designate the applicable failure rate level, shall be added to the applicable
listed dash number. Failure rate level (percent per 10,000 cycles): L, 3.0; M, 1.0; P, 0.1; R, 0.01.
Example, 029L - - - - - - 118R.
3/ 1.500 leads are inactive for new design.
4/ Relays supplied with spreader mounting pads (-101 through -106, -113 through -118, and -125 through -130)
shall have the spreader mounting pad rigidly attached.
5/ CAUTION: The use of any coil voltage less than the rated coil voltage will compromise the operation of the
relay.
Shock (specified pulse): MIL-STD-202, method 213, test condition B (75 g s). Contact chatter shall not exceed 10
microseconds maximum for closed contacts, and 1 microsecond maximum closure for open contacts.
Magnetic interference: Applicable.
Resistance to soldering heat: Applicable.
Acceleration: Applicable.
Salt atmosphere (corrosion): In accordance with MIL-STD-750, method 1041.
PHYSICAL DATA:
Terminal strength: MIL-STD-202, method 211.
Pull test: Test condition A, 1 pound pull.
Bend test: Test condition C, 1/2 pound load.
Twist test: As specified in MIL-PRF-39016.
Solderability: Applicable.
Weight: 2.55 grams (0.09 ounce) maximum, 2.80 grams (0.099 ounce) maximum with spreader mounting pad
attached.
Seal: Hermetic.
Minimum marking: Miliatry part number, J date code (example J0430), circuit diagram, manufacturer s name
or source code.
LIFE TEST REQUIREMENTS:
High level: 100,000 cycles per relay.
Low level: 100,000 cycles plus 900,000 cycles mechanical life.
Part or Identifying Number (PIN): M39016/15- (dash number from table I and suffix letter designating failure
8
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business