MIL-PRF-39016/14E
Electrical data:
Insulation resistance: 10,000 megohms minimum, except the resistance between coil and case at high
temperature shall be 1,000 megohms minimum.
Dielectric withstanding voltage:
Sea level
Altitude
V rms (60 Hz)
V rms (60 Hz)
Between case, frame, or enclosure, and between all contacts
in the energized and deenergized positions - - - - - - - - - - - -
750
Between case, frame, or enclosure and coil(s) - - - - - - - - - - -
500
350
Between all contacts and coil(s) - - - - - - - - - - - - - - - - - - - -
750
All terminals
Between open contacts in the energized and deenergized
to case
positions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
500
Between contact poles - - - - - - - - - - - - - - - - - - - - - - - - - - -
750
Environmental data:
Temperature range: -65°C to +125°C.
Vibration (sinusoidal): MIL-STD-202, method 204. Contact chatter shall not exceed 10 microseconds maximum for
closed contacts, and 1 microsecond maximum closure for open contacts.
Vibration (random): MIL-STD-202, method 214, test condition IG. Contact chatter shall not exceed 10
microseconds maximum for closed contacts, and 1 microsecond maximum closure for open contacts. Applicable to
qualification and group C testing only.
Shock (specified pulse): MIL-STD-202, method 213, test condition B (75 g's). Contact chatter shall not exceed 10
microseconds maximum for closed contacts, and 1 microsecond maximum closure for open contacts.
Magnetic interference: Applicable.
Resistance to soldering heat: Applicable.
Acceleration: Applicable.
Physical:
Terminals: See figure 1 and table I.
Terminal strength: 1.5 ±0.2 lbs. (pull).
Solderability: Applicable.
Terminal twist test: Applicable to wire lead terminals.
Dimensions and configuration: See figure 1.
Weight: 8.5 grams (0.30 ounce) maximum.
Identification marking (full): Applicable.
4