MS24152J
Inches |
mm |
Inches |
mm |
Inches |
mm |
.062 |
1.57 |
.625 |
15.88 |
2.468 |
62.69 |
.125 |
3.18 |
.922 |
23.42 |
2.750 |
69.85 |
.218 |
5.54 |
1.062 |
26.97 |
4.094 |
103.99 |
.250 |
6.35 |
1.531 |
38.89 |
4.187 |
106.35 |
.310 |
7.87 |
2.062 |
52.37 |
4.750 |
120.65 |
.344 |
8.74 |
2.141 |
54.38 |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerance is ±.031 inch (0.79 mm).
4. Additional washer may be used for terminal seat.
5. Terminal covers and barriers are required at power terminals.
6. In the event of a conflict between the text of this specification and the references cited herein, the text of this specification shall take precedence.
7. Referenced Government documents of the issue listed in that issue of the Department of Defense Index of Specifications and Standards (DoDISS) specified in the solicitation forms a part of this standard to the extent specified herein.
8. Cadmium or cadmium compounds are prohibited on external hardware. A transition period to non-cadmium hardware is authorized for up to 1 year from the date of this revision.
9. Spring washer on drawing is a spring lock washer.
FIGURE 1. Dimensions and configuration - Continued.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business