MIL-DTL-83726/27L
Inches |
mm |
Inches |
mm |
Inches |
mm |
.001 |
0.03 |
.062 |
1.57 |
.400 |
10.16 |
.002 |
0.05 |
.078 |
1.48 |
.500 |
12.70 |
.005 |
0.13 |
.079 |
2.01 |
.800 |
20.32 |
.015 |
0.38 |
.094 |
2.39 |
1.025 |
26.04 |
.020 |
0.51 |
.140 |
3.56 |
1.250 |
31.75 |
.030 |
0.76 |
.200 |
5.08 |
1.300 |
33.02 |
.040 |
1.02 |
.270 |
6.86 |
1.830 |
46.48 |
.045 |
1.14 |
.313 |
7.95 |
2.118 |
53.80 |
2.707 |
68.76 |
NOTES:
1. Dimensions are in inches.
2. Unless otherwise specified, tolerance is ±.010 (0.25 mm).
3. Metric equivalents are given for general information only.
4. Terminal numbers shall not appear on the relay header. There shall be affixed to the relay a legible circuit diagram which identifies each terminal location specified.
5. For mounting track, see MIL-DTL-12883/49. For bracket and socket assembly, see
6. Gasket material: Methylvinyl silicone; shore hardness A40.
7. Terminal plating: Shall provide the operational, environmental, and interface characteristics to provide a reliable interconnect to gold plated contacts. Terminals except for the polarizing pin, shall be gold plated. One system for gold plating that may be used is ASTM 8488, type 3,
class 1.25 with a nickel underplate of 50 to 150 microninches thick. The gold plating system shall enable the product to meet the performance requirements of this specification and shall be approved by the qualifying activity.
8. Knob and post shall be nickel plated (100 microinches thick minimum) 303 stainless steel.
FIGURE 1. Dimensions and configuration - Continued.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business