MIL-R-5757/29E
PHYSICAL DATA:
Terminal strength: 2 pounds axial pull. Terminal solderability: Applicable. Sealed by welding: Not applicable.
Dimensions and configuration: See figure 1. Termination: Pin type (PC).
Marking: See figure 1. Weight:
1 pole - 12 grams max.
2 pole - 18 grams max.
3 pole - 22 grams max.
4 pole - 24 grams max. LIFE TEST REQUIREMENTS:
High level: See table II for number of operations and cycling rate. Low level: See table II.
Minimum current: 20,000,000 operations at 900 to 1,200 operations per minute. Quality conformance inspection:
Periodic inspection: Groups B and C inspections are not required. QUALITY ASSURANCE:
Group A:
Subgroup 1: Applicable for low level loads only at a rate of approximately 60 operations/second. Subgroup 2: 100 percent.
Dielectric withstanding voltage: Test to be conducted at sea level rating only. Duration of application shall be 5 to 10
seconds at a 10 percent increase in the dielectric strength voltage.
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business