MIL-PRF-83726/36D
ELECTRICAL REQUIREMENTS:
Spike:
Self-generated: 50 volts maximum.
Spike transients: 600V, 10 microseconds maximum.
Susceptibility: + 80 V maximum; -600 V maximum.
Electromagnetic interference: In accordance with MIL-STD-461(methods CS101, CS114, RS101,
and RS103) for PIN's with suffix letter W. (EMI test limits will not be exceeded during the timing
interval or when continuously energized under steady-state conditions in accordance with the EMI
test of MIL-PRF-83726.)
Insulation resistance: 1,000 megohms at 500 V dc at sea level, and 100 V dc at 80,000 feet between
each pin and case. (Terminals X1, X2, and Y1 must be connected together during this test.
Insulation resistance is measured between all mutually insulated terminals and between all terminals
and case.)
Dielelectric withstanding voltage: 1,000 V rms at 60 Hz at sea level, and 350 V rms at 80,000 feet
between case and pins connected together. (Terminals X1, X2, and Y1 must be connected together
during this test. Dielectric withstanding voltage is measured between all mutually insulated terminals
and between all terminals and case.)
ENVIRONMENTAL REQUIREMENTS:
Ambient temperature:
Operating: -55C to +125C.
Nonoperating): -65C to +125C.
Vibration (sinusoidal): 30 g's, 10 Hz to 3,000 Hz.
Vibration (random): 0.4 g2/Hz power spectral density, 50 Hz to 2,000 Hz in accordance with
MIL-STD-202, method 214, test condition 1B.
Shock (specified pulse): 100 g's, 6 ms 1 ms, .5 sine, 3 axes.
Acceleration: 15 g's in any axis.
Seal: Hermetic.
Maximum altitude rating: 80,000 feet.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business