MIL-PRF-83726/28K
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerance is ±.010 (0.25 mm) for three place decimals and .03 (0.8 mm)
for two place decimals.
4. Terminal numbers shall not appear on the relay header and there shall be a legible circuit diagram on
the relay which identifies each terminal location specified.
5. Gasket material: The gasket material shall be of such quality to ensure the relay meets all the
performance requirements of this specification. Silicone rubber gasket SAE-AMS3332, shore
hardness 20 5 has been considered acceptable.
6. Terminal composition: The terminal composition shall be of such quality to ensure the relay meets all
the performance requirements of this specification. Gold in accordance with SAE-AMS2422 or
ASTM-B488, Type 3; underplating: nickel, 50 to 150 microinches thick; has been considered
acceptable.
7. Terminal C2 is optional.
FIGURE 1. Outline dimensions and configuration of relay Continued.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business