MIL-PRF-6106/47A
NOTES:
1. Dimensions are in inches.
2. Millimeter equivalents are for general information only.
3. Unless otherwise specified, tolerance is ± 0.062 in (1.57 mm)
4. Bracket consists of:
A: Mounting plate
B: Mounting cover
C: Spring washer ¼ inch UNC
D: Hexagon head screw ¼ inch UNC
FIGURE 2. Mounting bracket Continued.
VERIFICATION:
First article: First article inspection shall be performed at a laboratory acceptable to the Government on sample units
produced with equipment and procedures normally used in production, unless otherwise specified by the
Government. First article inspection shall be conducted in accordance with MIL-PRF-6106 table VII (Qualification
inspection (for relays fully rated 25 amperes and above)), in the order shown. The number of relays to be subjected
to first article inspection shall be as specified in table VII of MIL-PRF-6106.
Conformance inspection: All product for delivery shall be subject to conformance inspection in accordance with MIL-
PRF-6106 table VIII (Group A inspection).
For government logistical purposes use D6106/47-001 in lieu of the 26.02.15.
NOTES
Referenced documents. In addition to MIL-PRF-6106, this document references the following:
MIL-STD-202
Changes from previous issue: Marginal notations are mark with vertical lines to indicate where changes from the
previous issue were made. This was done as a convenience only and the Government assumes no liability
whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the
requirements of this document based on the entire content irrespective of the marginal notations and relationship to
the last previous issue.
Custodians:
Preparing activity:
Air Force - 11
DLA - CC
Army - AT
DLA CC
Review activity:
(Project 5945-2005-009)
Army - AR
Air Force - 99
NOTE: The activities listed above were interested in this document as of the date of this document. Since
organizations and responsibilities can change, you should verify the currency of the information above using ASSIST
Online database at https://assist.daps.dla.mil.
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business