MIL-PRF-6106/26G
PHYSICAL DATA:
Weight: 13 ounces, maximum.
Strength of terminals and mounting studs: Applicable.
Finish: Instrument black.
Seal: Hermetic.
Terminal barriers:
Base cover: Nonconductive. One type of insulator for meeting this requirement is MIL-I-24768/1. The
insulator shall enable the product to meet the performance requirements of this specification.
Barrier: Nonconductive. One type of insulator for meeting this requirement is PA110 G43 A99900 KB207
UB090 PA176 E12 in accordance with ASTM-D4066. The insulator shall enable the product to meet the
performance requirements of this specification.
ENVIRONMENTAL DATA:
Temperature range: -55C to +71C.
Altitude: 60,000 feet.
Dielectric withstanding voltage (sea level):
Initial
After life tests
Coil to case
1,000 V rms
1,000 V rms
Aux contacts
1,000 V rms
1,000 V rms
All other points
1,500 V rms
1,150 V rms
Dielectric withstanding voltage (altitude):
60,000 feet
Coil to case
500 V rms
500 V rms
Aux contacts
500 V rms
500 V rms
All other points
700 V rms
700 V rms
Insulation resistance: 100 megohms, minimum @ 500 volts.
Vibration (sinusoidal): .06 D.A., 10 Hz to 55 Hz, 10 g's 55 Hz to 1,500 Hz, 15 g's, 55 Hz to 1,000 Hz.
Shock: 25 g's for 11 milliseconds.
Acceleration: 10 g's.
Part number: M6106/26-001
Qualification by similarity: See MIL-PRF-6106.
Changes from previous issue. The margins of this specification are marked with vertical lines to indicate where
changes from the previous issue were made. This was done as a convenience only and the Government assumes
no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate
the requirements of this document based on the entire content irrespective of the marginal notations and
relationship to the last previous issue
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business