MIL-PRF-6106/12F
Inches
mm
Inches
mm
Inches
mm
.001
0.03
.156
3.96
.600
15.24
.002
0.05
.172
4.37
.625
15.88
.003
0.08
.234
5.94
.630
16.00
.005
0.13
.250
6.35
.937
23.80
.020
0.51
.270
6.86
1.010
25.65
.040
1.02
.300
7.62
1.025
26.04
.050
1.27
.312
7.92
1.062
26.97
.062
1.57
.385
9.78
1.396
35.46
.093
2.36
.395
10.03
1.406
35.71
.117
2.97
.432
10.97
1.446
36.73
.150
3.81
.450
11.43
1.718
43.64
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerance is ±.010 (0.25 mm).
4. There shall be affixed to the relay a legible circuit diagram that identifies each terminal location specified.
5. Notes to observe polarity must appear on relays.
6. To close main contact, (operate) energize X1 and X2. To open main contacts, (reset) energize Y1 and Y2.
7. Hook terminals will accept one no. 12 AWG stranded wire.
8. Socket pin terminals shall provide the operational, environmental, and interface characteristics to provide a
reliable interconnect to gold-plated contacts. Terminals shall be gold plated. Gold plating of the polarizing pin
is optional. One system for gold plating that may be used is ASTM B488, type 3, class 1.25 with a nickel
underplate of 50 to 150 microinches thick. The gold plating system shall enable the product to meet the
performance requirements of this specification and shall be approved by the qualifying activity.
9. Gasket shall provide a reliable seal between the relay and mating socket that will meet the environmental,
operational, and interface requirements of the relay with the mating socket. The gasket shall have shore
hardness 20 ±5, thickness .050 ±.005. Gasket material according to SAE-AMS 3332 has been considered
acceptable.
FIGURE 1. Relay, outline drawing - Continued.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business