MIL-PRF-39016/30F
Vibration (sinusoidal): MIL-STD-202, method 204. Contact chatter shall not exceed 10 microseconds maximum
for closed contacts, and 1 microsecond maximum closure for open contacts.
Vibration (random): MIL-STD-202, method 214, test condition IG. Contact chatter shall not exceed 10
microseconds maximum for closed contacts, and 1 microsecond maximum closure for open contacts (applicable
to qualification and group C testing only).
Shock (specified pulse): MIL-STD-202, method 213, test condition B (75 g's). Contact chatter shall not exceed
10 microseconds maximum for closed contacts, and 1 microsecond maximum closure for open contacts.
Magnetic interference: Applicable.
Resistance to soldering heat: Applicable.
Acceleration: Applicable.
Salt atmosphere (corrosion): In accordance with MIL-STD-750, method 1041.
PHYSICAL DATA:
Terminal strength (MIL-STD-202, method 211):
Pull test: Test condition A, 1 pound pull.
Bend test: Test condition C, ½ pound load.
Twist test: Test condition D as specified in MIL-PRF-39016.
Solderability: Applicable.
Dimensions and configuration: See figure 1, 2 and 3.
Weight: 2.84 grams (0.10 ounce) maximum, 3.09 grams (0.109 ounce) maximum with spreader mounting pad
attached).
Seal: Hermetic.
Minimum marking: Military part number, "J" with the date code (example J0430), circuit diagram,
manufacturer's name or source code.
LIFE TEST REQUIREMENTS:
High level: 100,000 cycles per relay.
Low level: 100,000 cycles plus 900,000 cycles mechanical life.
Part or Identifying Number (PIN): M39016/30- (dash number from table I and suffix letter designating failure
rate level).
6