MIL-PRF-39016/26F
COIL DATA: See table I.
Operate time: 4.0 ms maximum over temperature range with rated coil voltage.
Release time: 7.5 ms maximum over temperature range from rated coil voltage.
ELECTRICAL DATA:
Insulation resistance: 10,000 megohms minimum at 500 V dc, except the resistance between coil and case at
high temperature shall be 1,000 megohms minimum.
Dielectric withstanding voltage:
Post
intermediate
Altitude
Sea level
V rms (60
current life
V rms (60 Hz)
Hz)
test Sea level
V rms (60 Hz)
Between case, frame, or enclosure and all
contacts in the energized and de-energized
500
500
300
positions.
All terminals
Between case, frame, or enclosure and coils.
500
500
to case
Between all contacts and coils.
500
500
Between open contacts in the energized and de-
energized positions.
500
375
Between contact poles.
N/A
N/A
Between coils of dual coil relays.
N/A
N/A
DIODE CHARACTERISTICS
Coil transient suppression: Applicable.
Diode block integrity (perform this test after coil transient suppression test in all inspection tables of MIL-PRF-
39016): With applicable voltage applied to the relay coil circuit in the reverse direction, monitor leakage current
with dc microammeter, oscilloscope, or qualifying activity approved test equipment. Leakage current shall not
exceed the specified value.
Block integrity maximum leakage current: 1µA at 50 V dc.
Maximum negative transient: 1.0 volt.
Breakdown voltage: 100 V dc minimum at 10 microamperes (µA). (This test may be performed in-process or as
final assembly).
Semiconductor in-process screening: Applicable, visual inspection of semiconductors shall be in accordance
with MIL-STD-750, method 2073 or 2074.
ENVIRONMENTAL DATA:
Temperature range: -65°C to +125°C.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business