MS27418L
Inches |
mm |
Inches |
mm |
Inches |
mm |
.001 |
0.03 |
.138 |
3.51 |
1.12 |
28.5 |
.002 |
0.05 |
.152 |
3.86 |
1.187 |
30.15 |
.005 |
0.13 |
.173 |
4.39 |
1.406 |
35.71 |
.03 |
0.8 |
.187 |
4.75 |
1.465 |
37.21 |
.031 |
0.79 |
.225 |
5.72 |
1.50 |
38.1 |
.032 |
0.81 |
.244 |
6.20 |
1.531 |
38.89 |
.040 |
1.02 |
.375 |
9.52 |
1.550 |
39.37 |
.06 |
1.5 |
.38 |
9.7 |
1.680 |
42.67 |
.080 |
2.03 |
.593 |
15.06 |
2.000 |
50.80 |
.093 |
2.36 |
1.062 |
26.97 |
2.41 |
61.2 |
2.500 |
63.50 |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerance is ±.010 (0.25 mm).
4. A, B, and C contacts capable of accepting material from SAE-AS25036; SAE-AS25036-53 lugs, X1 and X2 contacts capable of accepting
SAE-AS25036-7 or -2 lugs.
5. Terminal numbers need not appear on relay headers provided there is affixed to the relay a suitable legible circuit diagram that identifies each terminal location specified.
6. In the event of a conflict between the text of this specification sheet and the references cited herein, the text of this
specification sheet shall take precedence.
7. Tin/lead plating over copper plating with a minimum lead content of 3%.
FIGURE 1. Dimensions and configurations - Continued.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business