MS25395J
Electrical characteristics.
Insulation resistance, initial 100 megohms. After life or environmental tests 50 megohms.
Dielectric strength (sea level).
Initial |
After life tests |
|
Coil to case |
1,000 V rms |
1,000 V rms |
Aux contacts All other points |
N/A 1,500 V rms |
N/A 1,125 V rms |
Dielectric strength (altitude):
80,000 |
80,000 ft |
|
Coil to case |
250 V rms |
1,000 V rms |
Aux contacts All other points |
250 V rms |
250 V rms |
Max contact drop initial: 0.150 volt. After life test: 0.175 volt.
Overload current (NO): 20 amperes Rupture current 25 amperes Duty rating: Continuous.
RFI specification: MIL-STD-461. (Applicable to coil circuits of ac operated relays).
Conformance inspection.
Performance of groups B and C tests may be suspended at the discretion of the qualifying activity. Qualification by similarity: See MIL-PRF-6106.
NOTES
Referenced documents. In addition to MIL-PRF-6106, this specification sheet references the following documents. (Government documents are available on line at https://assist.daps.dla.mil/quicksearch or www.dodssp.daps.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094).
SPECIFICATIONS Department of Defense
MIL-DTL-8777 - Wire, Electrical, Silicone-Insulated, Copper, 600-Volt, 200 Deg. C
MIL-PRF-23586 - Sealing Compound (with Accelerator), Silicone Rubber, Electrical
STANDARDS Department of Defense
MIL-STD-461 - Requirements for the Control of Electromagnetic Interference Characteristics of
Subsystems and Equipment
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business