Electrical characteristics. Insulation resistance, initial |
MS25273H 100 megohms. |
|
After life or environmental tests |
50 megohms. |
|
Dielectric strength (sea level). |
||
Initial |
After life tests |
|
Coil to case Aux contacts |
1,000 V rms |
1,000 V rms |
All other points |
1,500 V rms |
1,125 V rms |
Dielectric strength (altitude).
80,000 ft Coil to case 250 V rms Aux contacts
All other points 350 V rms
Max contact drop initial 0.150 volt. After life test 0.175 volt.
Overload current 40 amperes dc,
60 amperes ac. Rupture current 50 amperes,
80 amperes.
Duty rating Continuous. RFI specification MIL-STD-461
(Applicable to coil circuits of ac operated relays).
Conformance inspection.
Performance of groups B and C tests may be suspended at the discretion of the qualifying activity. Qualification by similarity: See MIL-PRF-6106.
NOTES
Referenced documents. In addition to MIL-PRF-6106, this specification sheet references the following documents. (Government documents are available on line at https://assist.daps.dla.mil/quicksearch or www.dodssp.daps.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094).
STANDARDS
Department of Defense
MIL-STD-461 - Requirements for the Control of Electromagnetic Interference Characteristics of
Subsystems and Equipment
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business