MS25273H
Inches .001 |
mm 0.03 |
Inches .235 |
mm 5.97 |
.002 |
0.05 |
.357 |
9.53 |
.005 |
0.13 |
.687 |
17.45 |
.010 |
0.25 |
.750 |
19.05 |
.031 |
0.79 |
.812 |
20.62 |
.040 |
1.02 |
1.100 |
27.94 |
.062 |
1.57 |
1.187 |
30.15 |
.138 |
3.51 |
1.531 |
38.89 |
.152 |
3.86 |
1.781 |
45.24 |
.187 |
4.75 |
NOTES:
1/ Dimensions are in inches.
2/ Metric equivalents are given for general information only.
3/ Unless otherwise specified, tolerance is ±.010 (0.25 mm).
4/ Terminal numbers need not appear on relay header provided there is affixed to the relay a suitable legible circuit diagram that permanently and positively identifies each terminal location specified hereon.
5/ In the event of conflict between the text of this specification and the references cited herein, the text of this specification shall take precedence.
61 Referenced Government documents of the issue listed in that issue of the Department of Defense Index of
Specifications and Standards (DoDISS) specified in the solicitation forms a part of this specification to the extent specified herein.
7/ The use of diodes on ac relays is optional. Actual application must be shown on label (dash numbers
-A1 and -A2 are inactive for new design).
TABLE I. Dash numbers and characteristics.
Dash number MS25273- |
Type |
Coil |
Terminal type |
Mounting |
Max weight in pounds |
D1 |
I |
dc |
Solder hook |
Stud |
.30 |
A1 1/ |
I |
ac |
Solder hook |
Stud |
.32 |
A2 1/ |
I |
ac |
Solder hook |
Stud |
.32 |
1/ Dash number -A1 and -A2 are inactive for new design and shall be used for support of existing systems only.
FIGURE 1. Dimensions and configurations - Continued.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business