MS25267H
Inches .001 |
mm 0.03 |
Inches .375 |
mm 9.53 |
.003 |
0.08 |
.593 |
15.06 |
.005 |
0.13 |
.687 |
17.45 |
.040 |
1.02 |
.750 |
19.05 |
.062 |
1.57 |
.812 |
20.62 |
.138 |
3.51 |
1.130 |
28.70 |
.152 |
3.86 |
1.187 |
30.15 |
.235 |
5.97 |
1.531 |
38.89 |
.343 |
8.71 |
1.750 |
44.45 |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerance is ±.010 (0.25 mm).
4. Terminal numbers need not appear on relay headers provided there is affixed to the relay a suitable legible circuit diagram that permanently and positively identifies each terminal location specified herein.
5. The use of diodes on ac relays is optional. Actual application must be shown on label.
6. In the event of conflict between the text of this standard and the references cited herein, the text of this standard shall take precedence.
7. Referenced Government documents of the issue listed in that issue of the Department of Defense Index of
Specifications and Standards (DoDISS) specified in the solicitation form a part of this standard to the extent specified herein.
TABLE I. Dash numbers and characteristics.
Dash number MS25267- |
Type |
Coil |
Terminal type |
Mounting or mating socket |
Max weight in pounds |
D1 |
I |
dc |
Solder hook |
Stud |
.32 |
A1 |
I |
ac |
Solder hook |
Stud |
.32 |
FIGURE 1. Dimensions and configurations - Continued.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business