MS25031M
Inches .010 |
mm 0.25 |
Inches .500 |
mm 12.70 |
.020 |
0.51 |
.531 |
13.49 |
.040 |
1.02 |
.810 |
20.57 |
.062 |
1.57 |
.875 |
22.23 |
.083 |
2.11 |
1.750 |
44.45 |
.093 |
2.36 |
2.052 |
52.12 |
.138 |
3.51 |
2.215 |
63.88 |
.201 |
5.11 |
2.593 |
65.86 |
.250 |
6.35 |
2.623 |
66.62 |
.266 |
6.76 |
3.000 |
76.20 |
.343 |
8.71 |
3.750 |
95.25 |
.350 |
8.89 |
6.000 |
152.40 |
.463 |
11.51 |
6.688 |
169.88 |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerance is ±.032 (0.81 mm).
4. Additional flat washer may be used for terminal seat.
5. In the event of a conflict between the text of this standard and the references cited herein, the text of this standard shall take precedence.
6. Referenced Government documents of the issue listed in that issue of the Department of Defense Index of
Specifications and Standards (DoDISS) specified in the solicitation forms a part of this standard to the extent specified herein.
7. Terminal numbers shall not appear on relay header. There shall be affixed to the relay, a suitable legible circuit diagram that identifies each terminal location.
8. Mechanical linkage shall be provided to prevent both relays being closed at the same time.
TABLE I. Dash numbers and characteristics.
Dash number MS25031- |
Type |
Coil |
Terminal type |
Mounting or mating socket |
Max weight in pounds |
D1B |
II |
dc |
Stud |
Plate |
3.5 |
FIGURE 1. Dimensions and configurations - Continued.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business