MS24568K
Inches .006 |
mm 0.15 |
Inches .410 |
mm 10.41 |
.012 |
0.30 |
.560 |
14.22 |
.020 |
0.51 |
1.000 |
25.40 |
.030 |
0.76 |
1.250 |
31.75 |
.100 |
2.54 |
2.000 |
50.80 |
.110 |
2.79 |
2.300 |
58.42 |
.173 |
4.39 |
2.685 |
68.20 |
.190 |
4.83 |
2.700 |
68.58 |
3.000 |
76.20 |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerance is ±.010 (0.25 mm).
4. Terminal numbers need not appear on relay headers provided there is affixed to the relay a suitable legible circuit
diagram that permanently and positively identifies each terminal location specified herein.
5. The use of diodes on ac relays is optional. Actual application must be shown on label (dash numbers -A1 and -A2 are inactive for new design).
6. In the event of a conflict between the text of this specification and the references cited herein, the text of this specification shall take precedence.
7. Referenced Government documents of the issue listed in that issue of the Department of Defense Index of Specifications and Standards (DoDISS) specified in the solicitation forms a part of this standard to the extent specified herein.
TABLE I. Dash numbers and characteristics.
Dash number MS24568- |
Type |
Coil |
Terminal type |
Mounting or mating socket |
Auxiliary contacts |
Max weight in pounds |
D1 |
I |
dc |
Screw |
Bracket |
N/A |
0.73 |
A1 1/ |
I |
ac |
Screw |
Bracket |
N/A |
0.75 |
A2 1/ |
I |
ac |
Screw |
Bracket |
N/A |
0.75 |
1/ Dash number -A1 AND A2 are inactive for new design and shall be used for support of existing equipment designs only.
FIGURE 1. Dimensions and configurations - Continued.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business