MS24192P
Inches .010 |
mm 0.25 |
Inches .265 |
mm 6.73 |
.093 |
2.62 |
.375 |
9.53 |
.094 |
2.39 |
.625 |
15.86 |
.125 |
3.18 |
.875 |
22.23 |
.126 |
3.20 |
2.062 |
52.37 |
.150 |
3.81 |
2.125 |
53.98 |
.164 |
4.17 |
2.469 |
62.71 |
.190 |
4.83 |
2.750 |
69.85 |
.219 |
5.56 |
3.062 |
77.77 |
.250 |
6.35 |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerance is ±.032 inch (0.81 mm).
4. Additional flat washer may be used for terminal seat.
5. In the event of a conflict between the text of this specification and the references cited herein, the text of this specification sheet shall take precedence.
6. Referenced Government documents of the issue listed in that issue of the Department of Defense Index of Specifications and Standards (DoDISS) specified in the solicitation forms a part of this standard to the extent specified herein.
7. Terminal numbers shall not appear on relay header. There shall be affixed to the relay a legible circuit diagram that identifies each terminal location.
8. Terminal covers and barriers required at power terminals.
9. Weights do not include covers and barriers.
10. For detail information, see tables I through III.
FIGURE 1. Dimensions and configuration - Continued.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business