MIL-R-83726/25H
Electrical data:
Transients: In accordance with MIL-STD-704 for 28 volts dc system (figure 11). Electromagnetic interference: In accordance with MIL-STD-461, class 1D. 3/ Insulation resistance: 1,000 megohms at 500 V dc between each pin and case. 4/
Dielectric strength: 1,000 volts rms at 60 Hz at sea level between case and pins connected together.
4/
Environmental data:
Maximum altitude rating: 80,000 feet.
Ambient temperature (operating and nonoperating): -55°C to +125°C.
Vibration (sinusoidal): 10 Hz to 55 Hz at 0.06 inch DA; 10 g's, 55 Hz to 500 Hz; 20 g's, 500 Hz to
3,000 Hz.
Vibration (random): MIL-STD-202, method 214, condition 18. Duration: 15 minutes each plane. Shock: 1,100 g's for 0.5 millisecond, ½ sine, 3 axes.
Acceleration: 100 g's, 3 axes. Seal: Hermetic.
Moisture resistance: MIL-STD-202, method 106. Physical data:
Dimensions and configuration: See figure 1. Terminations: See figure 1.
Terminal strength: 3 pounds pull.
Weight: 0.56 ounce (15.7 grams) maximum.
Marking: See MIL-PRF-83726. In addition, relays shall be marked with the ESDS identifier as specified in MIL-STD-1285.
3/ EMI test limits shall not be exceeded during the timing interval or when continuously energized under steady-state conditions in accordance with the radio interference requirements of MIL-PRF-
83726.
4/ Terminals X1, X2, and 81, and A3, must be connected together during this test. Dielectric withstanding voltage and insulation resistance are measured between all mutually insulated terminals and case.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business