MIL-R-83726/25H
Inches |
mm |
.001 |
0.03 |
.002 |
0.05 |
.003 |
0.08 |
.005 |
0.13 |
.010 |
0.25 |
.015 |
0.38 |
.040 |
1.02 |
.050 |
1.27 |
.055 |
1.40 |
.075 |
1.90 |
.080 |
2.03 |
.110 |
2.79 |
.130 |
3.30 |
.150 |
3.81 |
.158 |
4.01 |
.170 |
4.32 |
.200 |
5.08 |
.410 |
10.41 |
.640 |
16.26 |
.810 |
20.57 |
NOTES:
1. Dimensions are in inches.
2. Unless otherwise specified, tolerance is ±.010 (0.25 mm).
3. Metric equivalents are given for general information only.
4. Terminals A1, A2, 81, and 82 are connected internally. Do not use for external tie points or for terminals.
5. There shall be affixed to the relay a legible circuit diagram that identifies each terminal location specified.
6. Relays are intended for use with socket mount MIL-PRF-12883/52 and bracket mount MIL-PRF-
12883/53.
7. Terminal plating: Shall provide the operational, environmental, and interface characteristics to provide a reliable interconnect to gold plated contacts. Terminals except for the polarizing pin, shall be gold plated. One system for gold plating that may be used is ASTM 8488, type 3, class
1.25 with a nickel underplate of 50 to 150 microninches thick. The gold plating system shall enable the product to meet the performance requirements of this specification and shall be approved by the qualifying activity.
FIGURE 1. Dimensions and configuration - Continued.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business