MIL-R-83407/3D
TABLE I. Dash number and applicable characteristics.
Dash number 1/ |
Rated coil voltage 2/ V dc |
DC coil resistance ±10% Ohms |
Pickup voltage maximum V dc |
Dropout voltage minimum V dc |
Contact arrangement form |
|
001 002 003 004 005 006 007 008 009 010 |
011 012 013 014 015 016 017 018 019 020 |
4.5 12 12 4.5 4.5 12 4.5 12 4.5 12 |
100 500 500 87 50 300 44 250 44 250 |
4.0 9.6 9.6 4.0 4.0 9.6 4.0 9.6 4.0 9.6 |
0.4 0.9 0.9 0.4 0.4 0.9 0.4 0.9 0.4 0.9 |
1A 1A 1C 1C 2A 2A 2C 2C 3A 3A |
1/ Dash numbers -011 through -020 have gross leak and fine leak tests performed on the switch capsule.
2/ CAUTION: The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay.
Electrical data:
Dielectric withstanding voltage (sea level): MIL-STD-202, method 301.
Test potential: 500 V rms, 60 Hz. Test points:
Between case and all contacts connected. Between all contacts connected and coil. Between case and all other components.
Between electrostatic shield and all other components connected. Insulation resistance: 10,000 megohms minimum.
Test potential: 90 V dc.
Test points: between contacts (switch open). Capacitance (switch open):
Between contacts: 1 pF, maximum, measured at 1 kHz with shield guarded.
Between contacts and coil: 2 pF maximum.
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business