MIL-R-83407/30
Inches |
mm |
Inches |
mm |
.002 |
.05 |
.250 |
6.35 |
.020 |
.51 |
.410 |
10.41 |
.030 |
.76 |
.515 |
13.08 |
.1575 |
4.00 |
1.062 |
26.97 |
.200 |
5.08 |
1.100 |
27.94 |
.231 |
5.87 |
NOTES:
1. 0imensions are in inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified tolerance is ±.010 (.25 mm) for three place decimals and ±.03 (.8 mm) for two place decimals.
4. Terminal numbers need not appear on the relay header, provided there is a legible circuit diagram on the relay that identifies each terminal location specified.
5. Electrostatic shielding is provided at pins 6 or 14 as applicable.
FIGURE 1. Outline drawing (dash numbers 005 through 010 and 015 through 020) - Continued.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business