MIL-R-5757/10L
ELECTRICAL DATA: Run-in: Applicable.
Insulation resistance: 1,000 megohms minimum except the resistance between coil and case at high temperature shall be 500 megohms or greater.
Dielectric withstanding voltage:
Sea level V rms (60 Hz) |
Altitude V rms (60 Hz) |
|
Between case, frame or enclosure, and all contacts both in |
||
the energized and deenergized positions: ----------------------- |
1,000 |
|
Between case, frame or enclosure and coil: ------------------- |
500 |
350 |
Between all contacts and coil: ------------------------------------- |
1,000 |
All terminals |
Between open contacts in the energized and deenergized |
to case |
|
positions: ---------------------------------------------------------------- |
500 |
|
Between contact poles: ---------------------------------------------- |
1,000 |
ENVIRONMENTAL DATA:
Temperature range: -65°C to +125°C. Vibration: See table II.
Acceleration: Applicable. Shock: 100 g's.
Resistance to soldering heat: Applicable to pin type (printed circuit) terminals. Internal moisture: Applicable.
PHYSICAL:
Enclosure design: Hermetically sealed. Terminal strength:
Solder lug: 3 pound-pull ±0.3. Pin type: 2 pound-pull ±0.2.
Terminal twist test: Applicable to wire leads.
Sealed by welding: Applicable, except configurations D and E may be solder sealed. Dimensions and configuration: See figure 1.
Termination: See table II.
Weight: .050 pound (22.68 grams). Magnetic interference: Applicable.
8
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business