INCH-POUND
MILITARY SPECIFICATION SHEET RELAYS, ELECTRICAL, HERMETICALLY SEALED,
6PDT, LOW LEVEL TO 2 AMPERES
MIL-R-5757/1K
12 May 2011
SUPERSEDING MIL-R-5757/1J
3 September 2004
INACTIVE FOR NEW DESIGN AFTER 15 OCTOBER 1998
This specification sheet is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-R-5757.
Inches |
mm |
.005 |
0.13 |
.312 |
7.92 |
1.20 |
30.5 |
1.32 |
33.5 |
1.562 |
39.67 |
1.88 |
47.8 |
NOTES:
1. Dimensions are in inches.
2. Unless otherwise specified, tolerance is ±.010 (0.25 mm).
3. Metric equivalents are given for general information only.
4. A colored line or dot shall be placed in the position shown, or optionally, the adjacent terminal in a clockwise direction around the outermost terminal circle shall have a blue bead.
5. Mounting screw head clearance shall be provided so that the relay may be mounted using a round head machine screw having .250 (6.35 mm) nominal head diameter; also the mounting surface shall be flat, with a minimum .276 (7.01 mm) diameter, and concentric with the mounting hole.
FIGURE 1. Relay - solder lug configuration (M5757/1-021, -103, -027, and -028).
AMSC N/A FSC 5945
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business