MIL-R-39016/32F
Qualification inspection:
Qualification inspection and sample size: See table II.
TABLE II. Qualification inspection and sample size. 1/
Single submission |
Group submission |
|
50 units plus 1 open unit. One failure allowed. |
M39016/32-003 |
50 units plus 1 open unit. One failure allowed. |
Qualification inspection as applicable. |
Qualification inspection as applicable. |
|
M39016/32-016 |
Two units, qualification, Q1, also shock, vibration, acceleration, terminal strength and seal. |
|
M39016/32-020 |
One unit terminal strength and solderability |
|
1/ The number of units required for qualification testing will be increased as required in Q5, MIL-PRF-39016, if the relay manufacturer elects to test the number of units permitting one or more failures. Prior to performance of qualification inspection testing, the relay manufacturer shall preselect the sampling plan.
Supersession data: See table III.
TABLE III. Supersession data.
Superseded PIN M5757/21- |
New PIN M39016/32- |
001 002 003 004 005 006 007 008 009 010 011 012 |
001 No replacement 002 019 003 004 001 No replacement 002 019 003 004 |
Quality assurance provisions:
Group B and group C not required. Group A required. The qualifying activity shall be notified of any design and/or construction changes and shall impose additional testing requirements as necessary.
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business