MIL-R-39016/32F
Physical data:
Seal: Hermetic.
Terminals: See figure 1 and table I.
Terminal strength: 3 pounds ± 0.3 pound (pull). Solderability: Applicable.
Terminal twist test: Applicable to wire leads.
Dimensions and configurations: See figure 1 and table I. Weight: 1 ounce maximum.
Life test requirements:
High level: 100,000 cycles. Low level: 100,000 cycles.
Part or Identifying Number (PIN): M39016/32- (dash number from table I).
TABLE I. Dash numbers and characteristics. 1/
|
Dash number |
Mount |
Coil voltage (V dc) 2/ |
At +25qC |
Over temperature range |
||||
Solder lug |
Wire lead (SP) |
Wire lead 3/ |
Rated |
Max |
Coil resistance ohms ±10% |
Specified pickup (latch/reset) value (voltage) (V dc) 4/ |
Specified pickup (latch/reset) value (voltage) (V dc) 4/ |
|
001 002 003 005 |
--- --- 004 006 |
--- 019 --- 022 |
Stud Bracket Flange No mount |
26.5 |
32 |
975 |
12 |
18 |
007 008 009 011 |
--- --- 010 012 |
--- 020 --- --- |
Stud Bracket Flange No mount |
12 |
16 |
300 |
5.8 |
8.5 |
013 014 015 017 |
--- --- 016 018 |
--- 021 --- --- |
Stud Bracket Flange No mount |
6 |
8 |
82 |
3.0 |
4.2 |
1/ Relays previously tested or used above 10 mA resistive at 6 V dc maximum or peak ac open circuit shall not be used for low level applications.
2/ CAUTION: The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay.
3/ CAUTION: When mounting relays with 3-inch wire leads, do not bend the leads within .20 inch of the relay header.
4/ Allow 20 percent increase in maximum operate values during and after rated life.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business