INCH-POUND
MILITARY SPECIFICATION RELAY, SENSITIVE
(FOR TORPEDO MARK 37 MOD 2)
MIL-R-19309D
7 March 2003
SUPERSEDING MIL-R-19309C(OS)
3 September 1970
Inactive for new design after 31 July 1996. No superseding specification.
1. SCOPE
This specification is approved for use by the Naval Surface Warfare Center, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
1. Scope. This specification describes the requirements for the acquisition of a double-pole, double-throw, sensitive electromagnetic relay, Drawing 1521140. The coil is rated at one watt at a voltage of 31.6 V dc. The relay is used in the control of functional circuits which operate on a nominal dc voltage of 25 volts and dc current up to two amperes.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This section does not include documents cited in other sections of this specification or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements documents cited in sections 3 and 4 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the issue of the Department of Defense Index of Specifications and Standards (DoDISS) and supplement thereto, cited in the solicitation (see 6.2).
SPECIFICATION FEDERAL
A-A-208 - Ink, Marking, Stencil, Opaque, (Porous and Non-Porous Surfaces). A-A-3003 - Lacquer, Spraying, Clear and Pigmented, for Interior Use.
O-S-642 - Sodium Phosphate, Tribasic, Anhydrous, Dodecahydrate; and Monohydrate; Technical.
FF-N-836 - Nut: Square, Hexagon, Cap, Slotted, Castle, Knurled, Welding and Single Ball Seat.
FF-S-86 - Screw, Cap, Socket-Head.
FF-S-92 - Screw, Machine, Slotted, Cross Recessed or Hexagon Head.
TT-C-490 - Cleaning Methods for Ferrous Surfaces and Pretreatments for Organic Coatings. TT-P-1757 - Primer Coating, Alkyd Base, One Component.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Defense Supply Center, Columbus, ATTN: DSCC/VAT, Post Office Box 3990, Columbus, OH 43216-5000, by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter.
AMSC N/A FSC 5945
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business