MIL-DTL-12109/21B
1. This drawing is for interface and envelope requirements and is not intended to limit
design.
2. Dimensions are in inches. Unless otherwise specified, tolerances are ±.010 on
decimals, ±2 on angular dimensions.
3. REF = Reference
4. The solenoid boot shall be made per the following properties:
ASTM D2000 M2BC 614 B13 C32 F17 Z1 Z2 Z3
Z1 = H2 (38) IAW ASTM D430 METHOD B
Z2 = 350% MAX. ULTIMATE ELONGATION IAW ASTM D412 DIE C
Z3 = K24, 3.5 KN/M WIDTH IAW ASTM D429 METHOD B, 100 °C
FIGURE 2. Solenoid characteristics - Continued.
Custodians:
Preparing Activity:
Army - AT
Army - AT
Navy - OS
Air Force - 85
(Project 5945-2011-004)
Review Activities:
Army - AR, EA
Navy - MC
Air Force - 99
DLA - CC
NOTE: The activities listed above were interested in this document as of the date of this
document. Since organizations and responsibilities can change, you should verify the currency
of the information above using the ASSIST Online database at https://assist.daps.dla.mil.
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business