MS27247M
Inches |
mm |
Inches |
mm |
Inches |
mm |
.0001 |
0.025 |
.144 |
3.66 |
1.000 |
25.40 |
.002 |
0.05 |
.156 |
3.96 |
1.015 |
25.78 |
.005 |
0.13 |
.200 |
5.08 |
1.356 |
34.44 |
.010 |
0.25 |
.210 |
5.33 |
1.484 |
37.69 |
.015 |
0.38 |
.213 |
5.41 |
1.719 |
43.66 |
.050 |
1.27 |
.375 |
9.52 |
1.750 |
44.45 |
.062 |
1.57 |
.515 |
13.08 |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerance is ±.010 (0.25 mm).
4. Terminal numbers need not appear on relay headers provided there is affixed to the relay a suitable legible circuit diagram that identifies each terminal location specified.
5. Socket pin terminals shall provide the operational, environmental, and interface characteristics to provide a
reliable interconnect to gold-plated contacts. Terminals shall be gold plated. One system for gold plating that may be used is ASTM 8488, type 3, class 1.25 with a nickel underplate of 50 to 150 microinches thick. The gold
plating system shall enable the product to meet the performance requirements of this specification and shall be approved by the qualifying activity.
6. Gasket shall provide a reliable seal between the relay and mating socket that will meet the environmental, operational, and interface requirements of the relay with the mating socket. The gasket shall have shore hardeness 20 ±5, thickness .050 ±.05. Gasket material according to AMS 3332 has been considered acceptable.
FIGURE 1. Dimensions and configurations - Continued.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business