MS25918H
Environmental requirements:
Temperature range: -65°C to +120°C.
Life test requirements: 50, 000 cycles minimum. Operating period: 3 hours minimum.
Duty rating: Continuous.
Qualification by similarity: See MIL-PRF-6106.
Group B and Group C inspections are not applicable.
Group A acceptance reports shall be submitted to the qualifying activity on a yearly basis in order to retain qualification for this detail specification sheet.
Part or identifying number: (PIN): MS25918-D1 for solder terminals or MS25918-D2 for potted leads.
NOTES
Referenced documents. In addition to MIL-PRF-6106, this specification sheet references the following documents. (Government documents are available on line at https://assist.daps.dla.mil/quicksearch or www.dodssp.daps.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094).
SPECIFICATIONS Department of Defense
MIL-DTL-8777 - Wire, Electrical, Silicone-Insulated, Copper, 600-Volt, 200 Deg. C MIL-PRF-23586 - Sealing Compound (with Accelerator), Silicone Rubber, Electrical
Custodian: Preparing activity: Navy - AS DLA - CC
Air Force - 11
DLA - CC (Project 5945-1214-18)
NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using ASSIST Online database at www.dodssp.daps.mil.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business