MS25917H
Inches .010 |
mm 0.25 |
Inches .656 |
mm 16.66 |
.060 |
1.52 |
.750 |
19.05 |
.062 |
1.57 |
.812 |
20.62 |
.093 |
2.36 |
1.000 |
25.40 |
.112 |
2.84 |
1.130 |
28.70 |
.125 |
3.18 |
1.500 |
38.10 |
.250 |
6.35 |
1.750 |
44.45 |
.375 |
9.53 |
2.187 |
55.55 |
.500 |
12.70 |
6.000 |
152.40 |
.625 |
15.88 |
24.000 |
609.60 |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Terminal numbers do not appear on the relay header. There shall be affixed to the relay a suitable legible circuit diagram that identifies each terminal location specified. Circuit diagram shown above is the terminal
view.
4. In the event of a conflict between the text of this standard and the references cited herein, the text of this standard shall take precedence.
5. Referenced Government documents found on https://assist.daps.dla.mil/quicksearch/ and specified in the solicitation or contract form a part of this specification sheet to the extent specified herein.
6. Unless otherwise specified, tolerance is ± .010 (0.25 mm).
FIGURE 1. Dimensions and configurations - Continued.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business