MS25467E
NOTES:
11 Dimensions are in inches.
21 Metric equivalents are given for general information only.
31 Unless otherwise specified, tolerance is ±.010 (0.25 mm).
41 Terminal numbers need not appear on relay headers provided there is affixed to the relay a suitable legible circuit diagram that permanently and positively identifies each terminal location specified hereon.
51 The use of diodes on ac relays is optional. Actual application must be shown on label.
61 Shock, vibration, and acceleration requirements application with coils de-energized
71 Relay is magnetically latched in both positions.
81 Caution note to observe polarity must appear on relays with dc coils.
Inches mm
.000 0.00
.001 0.03
.005 0.13
.031 0.79
.040 1.02
.152 3.86
.187 4.75
.375 9.53
.687 17.45
.750 19.05
1.032 26.21
1.187 30.15
1.531 38.89
1.812 46.02
91 In the event of conflict between the text of this specification and the references cited herein, the text of this standard shall take precedence.
101 Referenced Government documents of the issue listed in that issue of the Department of Defense Index of
Specifications and Standards (DoDISS) specified in the solicitation form a part of this standard to the extent specified herein.
TABLE I. Dash numbers and characteristics.
Dash number MS25467- |
Type |
Coil |
Terminal type |
Mounting or mating socket |
Max weight in pounds |
D1 |
I |
dc |
Solder hook |
Stud |
0.30 |
A1 |
I |
ac |
Solder hook |
Stud |
0.32 |
FIGURE 1.Dimensions and configurations - Continued.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business