MS25466F
NOTES:
11 Dimensions are in inches.
21 Metric equivalents are given for general information only.
31 Unless otherwise specified, tolerance is ±.010 (0.25 mm).
41 Terminal numbers need not appear on relay headers provided there is affixed to the relay a suitable legible circuit diagram that permanently and positively identifies each terminal location specified hereon.
51 The use of diodes on ac relays is optional. Actual application must be shown on label.
61 Shock, vibration, and acceleration requirements application with coils de-energized
71 Relay is magnetically latched in both positions. Caution note to observe polarity must appear on relays with dc coils.
81 Caution note to observe polarity must appear on relays with dc coils.
91 In the event of conflict between the text of this specification and the references cited herein, the text of this standard shall take precedence.
101 Referenced Government documents of the issue listed in that issue of the Department of Defense Index of Specifications and Standards (DoDISS) specified in the
solicitation form a part of this standard to the extent specified herein.
TABLE I. Dash numbers and characteristics.
Inches mm
.000 0.00
.001 0.03
.002 0.05
.005 0.13
.031 0.79
.040 1.02
.062 1.57
.152 3.86
.187 4.75
.235 5.97
.375 9.53
.687 17.45
.750 19.90
.812 20.62
1.030 26.21
1.531 38.89
1.812 46.02
Dash number |
Type |
Coil |
Terminal type |
Mounting |
Max weight |
MS25466- |
means |
in pounds |
|||
D1 |
I |
dc |
Solder hook |
Stud |
0.30 |
A1 |
I |
ac |
Solder hook |
Stud |
0.32 |
AD1 |
I |
ac-dc |
Solder hook |
Stud |
0.32 |
FIGURE 1. Design, dimensions, and circuit diagram - Continued.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business