MS25329M
10. Gasket shall provide a reliable seal between the relay and mating socket that will meet the environmental, operational, and interface requirements of the relay with the mating socket. The gasket shall have thickness .075, recessed .047 in to bracket. Gasket material according to AMS 3332 has been considered acceptable.
11. Gasket shall provide a reliable seal between the relay and mating socket that will meet the environmental, operational, and interface requirements of the relay with the mating socket. The gasket shall have shore
hardness 20 ±5, thickness .047 ±.008 flush with bracket. Gasket material according to AMS 3332 has been considered acceptable.
FIGURE 1. Dimensions and configurations - Contintued.
TABLE I. Dash numbers and characteristics.
Dash number MS25329- |
Type |
Coil |
Terminal type |
Max weight in pounds |
D1 |
I |
dc |
Plug in |
0.4 |
A1 |
I |
ac |
Plug in |
0.4 |
TABLE II. Operating characteristics.
PIN MS 25329- |
Coil data |
Time - (milliseconds maximum) |
|||||||||||||||
Coil |
Rated |
Max |
Max pick-up voltage |
Drop out volt- age 21 |
Hold volt- age 21 |
Oper- ate 31 |
Rel- ease 41 |
Contact Bounce |
|||||||||
|
Volts 11 |
Freq Hz |
Res ν |
Volts |
Amp |
Nor- mal 21 |
High temp test |
Cont cur- rent test |
Main |
Aux |
||||||||
NO |
NC |
NO |
NC |
||||||||||||||
D1 |
X1,X2 |
28 |
dc |
N1A |
29 |
0.18 |
18 |
19.8 |
22.5 |
1.5 |
7.0 |
25 |
20 |
2 |
2 |
--- |
--- |
A1 |
X1,X2 |
115 |
400 51 |
N1A |
122 |
0.04 |
90 |
95 |
103 |
5.0 |
30 |
25 |
50 |
2 |
2 |
--- |
--- |
11 CAUTION: Use of any coil voltage less than rated coil voltage will compromise the operation of the relay.
21 Over the temperature range.
31 With rated coil voltage.
41 From rated coil voltage.
51 MS25329-A1 may be used on 60 Hz if maximum ambient temperature is limited to 85°C, maximum current will be 0.044 ampere.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business