Part or identifying number (PIN) |
Dimensions |
Electric receptacle to conform to |
Pin connections |
Max wt (lbs) |
Dur- ation of life test hours |
Supersedes |
|||||||||
l |
w |
H |
D |
c |
E |
A |
B |
c |
D |
E |
|||||
MS24577-1 See note 11 |
2.000 (50.80) |
2.500 (63.50) |
2.594 (65.89) |
.175 (4.45) |
.250 (6.35) |
1.125 (25.58) |
MS33678-16S-8P |
Not used |
5.2 amp dc input |
Internally connected 5 amp dc total output |
N/A |
1.5 |
800 |
Substitute MS24577-2A |
|
MS24577-2A |
2.000 (50.80) |
2.500 (63.50) |
2.594 (65.89) |
.175 (4.45) |
.250 (6.35) |
1.125 (25.58) |
MS33678-16S-8P |
Not used |
5.2 amp dc input |
Internally connected 5 amp dc total output |
Grounded internally |
1.0 |
800 |
MS24577-1 |
|
MS24577-3 See note 11 |
3.000 (76.40) |
5.375 (131.53) |
4.500 (114.30) |
.260 (6.60) |
.375 (9.53) |
.688 (17.48) |
MS33678-16S-8P |
Not used |
5.2 amp dc input |
5 amp dc output |
Grounded internally |
2.5 |
1,000 |
N/A |
|
MS24577-4 |
2.750 (69.85) |
3.500 (89.10) |
2.594 (65.89) |
.200 (5.08) |
.250 (6.35) |
.562 (14.27) |
MS33678-14S-5P |
7.7 amp dc input |
7.5 amp dc output |
Not used |
Grounded internally |
Not used |
1.0 |
1,000 |
MS25204-1 (F-2) See note 12 |
MS24577-5 See note 11 |
2.000 (50.80) |
2.500 (63.50) |
2.594 (65.89) |
.175 (4.45) |
.250 (6.35) |
1.125 (25.58) |
MS3113H8-4P |
Not used |
1.2 amp dc input |
1 amp dc output |
Grounded internally |
N/A |
.5 |
1,000 |
N/A |
MS24577-6 See note 11 |
2.750 (69.85) |
3.500 (89.10) |
2.594 (65.89) |
.200 (5.08) |
.250 (6.35) |
.562 (14.27) |
MS33678-18-4P |
0.22 amp ac input |
7.5 amp ac or dc input |
7.5 amp ac or dc input |
Grounded internally |
N/A |
2.0 |
1,000 |
F-3 |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Metric equivalents are in parentheses.
4. Unless otherwise specified, tolerance is ± .010 (0.25 mm).
5. The flasher need not have the shape shown, but shall be contained within the outline shown.
6. Flash rate shall be 80 ± 10 F/M.
7. For allowable voltage variation see 3.5.2.
8. Allowable voltage variation ± 5.0 percent of rated frequency.
9. For design feature purposes, this specification sheet takes precedence over acquisition documents referenced herein.
10. Referenced documents shall be of the issue in effect on date of invitation for bid.
11. This PIN is cancelled without replacement.
12. with 2 MS25204-2 mounting adapters, supersedes F-1 ∆ 28 V dc, 115 V ac.
13. First article testing shall be performed in accordance with MIl-F-26301.
FIGURE 1. Dimensions and configuration - continued.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business