MS24193H
Inches .010 |
mm .25 |
Inches .210 |
mm 5.33 |
Inches .875 |
mm 22.23 |
.031 |
.79 |
.219 |
5.56 |
2.350 |
59.69 |
.062 |
1.57 |
.250 |
6.35 |
2.750 |
69.85 |
.063 |
1.60 |
.344 |
8.74 |
3.188 |
80.98 |
.125 |
3.18 |
.500 |
12.70 |
3.312 |
84.12 |
.164 |
4.17 |
.656 |
16.66 |
3.625 |
92.08 |
.190 |
4.83 |
.812 |
20.62 |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerances are ±.031 (0.79 mm).
4. Additional flat washer may be used for terminal seat.
5. Terminal covers and barriers required at power terminals.
6. Part number MS24193-D1 replaces number AN3341-1.
7. In the event of a conflict between the text of this specification and the references cited herein, the text of this specification shall take precedence.
8. Referenced Government documents of the issue listed in that issue of the Department of Defense Index of Specifications and Standards (DoDISS) specified in the solicitation forms a part of this standard to the extent specified herein.
TABLE I. Dash numbers and characteristics.
Dash number MS24193- |
Type |
Coil |
Terminal type |
Mounting or mating socket |
Max weight in pounds |
D1 |
II |
dc |
Stud |
Plate |
1.6 |
FIGURE 1. Dimensions and configurations - Continued.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business