MIL-R-83726/24L
Electromagnetic interference: In accordance with MIL-STD-461, class 1D. 3/
Insulation resistance: 1,000 megohms at 500 V dc between each pin and case. 4/
Dielectric strength: 1,000 volts rms at 60 Hz at sea level between case and pins connected together.
4/
Environmental data:
Maximum altitude rating: 80,000 feet.
Ambient temperature (operating and nonoperating): -55°C to +125°C.
Vibration (sinusoidal): 10 Hz to 55 Hz at 0.06 inch DA; 10 g's, 55 Hz to 500 Hz; 20 g's, 500 Hz to
3,000 Hz.
Vibration (random): MIL-STD-202, method 214, condition I, letter C, duration of 30 minutes. Shock: 1,100 g's for 0.5 millisecond, ½ sine, 3 axes.
Acceleration: 100 g's, 3 axes. Seal: Hermetic.
Moisture resistance: MIL-STD-202, method 106. Physical data:
Dimensions and configuration: See figure 1. Terminations: See figure 1.
Terminal strength: 3 pounds pull.
Weight: 0.56 ounce (15.7 grams) maximum.
Marking: See MIL-PRF-83726. In addition, relays shall be marked with the ESDS identifier as specified in MIL-STD-1285.
3/ EMI test limits shall not be exceeded during the timing interval or when continuously energized under steady-state conditions in accordance with the radio interference requirements of MIL-PRF-
83726.
4/ Terminals X1, X2, and A1, A3, and 81 must be connected together during this test. Dielectric withstanding voltage and insulation resistance are measured between all mutually insulated terminals and the case.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business